RosinTEK ADVANCED 2T Heat Press - Quick Guide

The RosinTEK ADVANCED 2T Personal Rosin Press balances compact size with higher pressing power for users who want more headroom and consistency.

Place the ADVANCED press on a sturdy, flat surface and secure it firmly with the supplied clamp.
Adjust the pressure knob if needed to fit the thickness of your material.
Flip the power switch to turn the press on.
Use the control panel to set plate temperature, time, and temperature scale (°C or °F) with the Set, Up, and Down buttons. Refer to the user manual or video guide for details.
Wait until the plates reach the target temperature. The heating icons will switch off when ready.
Position your material in the center of the bottom plate.
Slowly and firmly pull down the lever to close the plates until it locks. Tip: extra force will not increase pressure and can strain the mechanism.
Press the Timer button to start the countdown.
When the timer ends, the press will beep. Press the Timer button again to stop the alarm.
Lift the lever to open the plates and carefully remove your pressed material with parchment paper.
Turn off the machine when finished.

Accessory	Options
Pre Press Molds	Cylinder mold (stainless steel)
Filter Bags	2" × 3" • 2" × 4"
Parchment Paper	15 × 25 cm (50 sheets)
Tool set	6 piece tool set
Cooling Plate	150 × 100 mm cool plate