RosinTEK SIMPLE 0.5T Heat Press - Quick Guide

RosinTEK SIMPLE 0.5T Personal Rosin Press

The RosinTEK SIMPLE 0.5T Personal Rosin Press is designed for effortless home use. Compact, lightweight, and easy to operate, it delivers consistent pressing results for beginners and hobbyists.

Recommended Amount:

  • Up to 5 grams per press
  1. Place the SIMPLE press machine on a sturdy, flat surface and remove the plates shield (cover). Plug the press into a power outlet.
  2. Rotate the pressure wheel to adjust the vertical position of the top platen. This lets you better control the pressure between the plates during operation.
  3. Flip the power switch to turn on the press, then lift the lever.
  4. Enter your desired press parameters (temperature, time, temperature scale) using the press control panel. Please refer to the user manual for detailed instructions and visual guides, or watch the instructional video provided. The control panel is universal and works the same way for all of our presses.
  5. Wait until the heating plates reach the set temperature before proceeding.
  6. Place your material in the center of the bottom plate, making sure it is properly aligned.
  7. Lower the lever to close the plates and apply pressure. Release the lever -- the press will automatically maintain the applied pressure.
  8. Start the countdown timer by pressing the Timer button.
  9. Once the countdown ends, press the Timer button again to stop the beeping alarm.
  10. Lift the lever to open the plates completely.
  11. Remove your pressed material carefully using the appropriate tools or heat-resistant gloves.

Recommended Accessories

Accessory Options
Pre Press Molds Cylinder mold (stainless steel)
Filter Bags 2" × 3"  •  2" × 4"
Parchment Paper 15 × 25 cm (50 sheets)
Tool set 6 piece tool set
Cooling Plate 150 × 100 mm cooling plate

SHARE: