RosinTEK CORE 10T Heat Press - Quick Guide

RosinTEK CORE 10T Heat Press

The RosinTEK CORE 10T Heat Press is designed for serious extractors who want stability, built-in pressure monitoring, and versatile pressing in both upright and tilted positions. Featuring a reinforced frame and integrated gauge, the CORE ensures precision and reliability with every press.

Recommended Amount:

  • Up to 30 grams per press
  1. Place the CORE press on a sturdy, flat table surface.
  2. Attach the support legs as described in the manual and tighten the screws securely.
  3. Use the jack handle to close the release valve firmly.
  4. Connect the power cord, plug into an outlet, and flip the power switch on.
  5. Set your desired press parameters (temperature, time, and °C/°F scale) using the Set, Up, and Down buttons. Refer to the user manual or instructional video for detailed guidance. The heating will start automatically.
  6. Wait until the plates reach the target temperature.
  7. Place your prepared material in the center of the bottom plate.
  8. Use the jack handle to pump gently and apply pressure. Monitor the built-in pressure gauge for accuracy.
  9. Press the Timer button to start the countdown once pressure is reached.
  10. Tilt the press backward onto its support legs for stable operation.
  11. When the timer ends and the press beeps, return it upright and stop the beeping by pressing the Timer button again.
  12. Release pressure by opening the jack’s valve with the handle.
  13. Remove your pressed material carefully using tools or heat-resistant gloves.
  14. Continue with the next load, or switch off and unplug the press when done.

Recommended Accessories

Accessory Options
Pre-Press Mold 3" × 5"
Filter Bags 3" × 5"  •  2.5" × 6.5"
Parchment Paper 20 × 30 cm (50 sheets)
Tool Set 6 piece tool set
Cooling Plate 150 × 100 mm cooling plate

SHARE: