RosinTEK DELUXE 10T Heat Press - Quick Guide

RosinTEK DELUXE 10T Heat Press

The RosinTEK DELUXE 10T Heat Press is built for extractors who demand larger pressing capacity, long-term durability, and the flexibility of DripTek operation. Its reinforced hydraulic system delivers consistent high-pressure results batch after batch.

Recommended Amount:

  • Up to 25 grams per press
  1. Place the DELUXE press on a sturdy, flat table. If using the DripTek stand, assemble and securely mount the press onto it.
  2. Use the hydraulic jack handle to firmly close the release valve.
  3. Flip the power switch to turn the press on.
  4. Program the control panel to set your desired plate temperature(s), time, and scale (°C/°F) using the Set, Up, and Down buttons. Refer to the user manual for detailed instructions and visual guides.
  5. Wait until the plates reach the target temperature. The heating icons will switch off when ready.
  6. Fold your material in parchment paper and position it in the center of the bottom plate.
  7. Insert the jack handle and pump until the plates close and pressure is reached.
    Tip: If the plate no longer moves upward, max pressure has been achieved.
  8. Press the Timer button to start the countdown.
  9. If using DripTek, undo the latch and tilt the press forward until it rests on the stop bar. Place parchment on the table surface to catch dripping rosin.
  10. When the timer ends, return the press to the upright position and secure the latch.
  11. Turn off the timer and slowly unscrew the jack’s release valve to open the plates.
  12. Carefully remove your pressed material.
  13. Turn off the machine when finished and collect your rosin with the proper tools.
  14. If mounted on DripTek, remove the press before cleaning and storage.

Recommended Accessories

Accessory Options
Pre Press Mold 2" × 4"
Filter Bags 2" × 4"
Parchment Paper 20 × 30 cm (50 sheets)
Tool Set 6 piece tool set
Cooling Plate 150 × 100 mm cooling plate
DripTek Mount Stand DripTEK mount stand

SHARE: